Home > Drive Not > My Cd And Dvd Drive Not Working

My Cd And Dvd Drive Not Working


Turn on the computer and wait for Windows to start. Yes DVD kind or CD kind, nothing works. Corruption in Windows Try testing the CD-ROM in Safe Mode. note: If you suspect that the drive may be bad after using these steps, test the drive to see if the hardware has failed. navigate here

probably over £50. Use the arrow keys to navigate to the Storage tab. In the Device Manager window, expand DVD/CD-ROM drives. Figure : Power cable and data cable Power cable Data cable Reinsert the power and data cables into the back of the drive making sure the cables fit snugly into their http://support.hp.com/us-en/document/c03370738

Cd Drive Not Working Windows 10

Press the Esc key again, press Enter, then press Enter again to Ignore Changes and Exit BIOS. Loading... External hard disks are unaffected. Type devmgmt.msc in the Run dialog box, then press Enter key to view Device Manager.

Figure : Device Manager: DVD/CD-ROM drives If a name for a CD/DVD drive does not appear, or it is listed with errors, close Device Manager and use the HP support document I paid £11 for mine. If not, select it. Cd Drive Not Reading Disc Make sure you type the correct drive letter for the drive that contains the disc, followed by a colon (:).

If the CD/DVD drive is listed, make sure AutoPlay is enabled. Dvd Drive Not Working Windows 10 A copy of the registry has saved for back-up purposes to the Documents folder. Step 5: Reinstalling the CD/DVD drive in Device Manager Use the following steps to remove and reinstall the drive name in Device Manager: Remove any discs that may be in the

The CD/DVD drive does not appear If a window does not open when discs are inserted into the drive and the drive does not display in File Explorer, then the drive

In Device Manager, click Action, select Scan for hardware changes, then wait for Windows to find and install the CD/DVD drive. Cd Drive Not Showing Figure : New Multi-String Value Replace the default text for the new value by typing the following and then pressing Enter: LowerFilters Right-click the new LowerFilters value and select modify. When done, use the CD or DVD drive again to see if it can read discs. The disc drive should now be recognized by your recording software.

Dvd Drive Not Working Windows 10

You do not have to remove that entry. http://support.hp.com/us-en/document/c03280768 Z7_3054ICK0KGTE30AQO5O3KA30H5 hp-country-locator-portlet Actions ${title} Loading... Cd Drive Not Working Windows 10 Verify if the drive is recognized in BIOS/System Setup Run the Dell PC Diagnostics on the Optical Drive (CD, DVD or Blu-Ray drive) Run the Hardware and Devices troubleshooter Run the Cd Drive Not Working Windows 7 Ask the community!

I ended up talking to a windows engineer live on line who insisted he could fix this problem with remote control with my computer while I watch. check over here Click Start, click Run, type regedit, and then click OK. If the message "device is not ready" is shown, or the screen fails to update after 30 seconds, the disc or the drive may be bad. caution: This product contains components that can be damaged by electrostatic discharge (ESD). Cd Drive Not Working Windows 8

Finally. Then see if it will read either CD or DVD. Table of Contents: Symptom Troubleshooting steps Symptom There could be several reasons why a CD, DVD or Blu-Ray drive is not detected or recognized by Microsoft Windows or other applications. http://amptools.net/drive-not/my-cd-r-drive-is-not-working.html If the liquid from the repair kit has not dried thoroughly, the liquid may come off of the disc when the disc spins up.

Type diskpart at the command prompt and press Enter. Dvd Drive Not Detected If yes, proceed to the next step. Most home electronics stores offer repair and cleaning kits for discs at minimal cost.

Back to Top Run the Hardware and Devices troubleshooter (Windows 7, Windows 8, Windows 8.1 and Windows 10) You can run the Windows Hardware and Devices troubleshooter which is built-in to

Once you have installed the updates or if no updates were available, continue to restore system files. Hopefully, you will be back on track and leave the frustration behind. Follow the instructions on the download pages to download each applicable update. Dvd Drive Not Detected In Windows 10 Once you have checked if the CD/DVD drive appears in the BIOS, check the drive name in Device Manager.

Type devmgmt.msc in the Run dialog box, then press Enter key. Once you have checked the BIOS for problems, use the Hardware and Devices troubleshooter to check the hardware for problems. After CyberLink Power2Go has been uninstalled, restart the computer. weblink If the troubleshooter detects problems, follow the instructions to fix the problem.

If a window does not open when discs are inserted into the drive and the drive does not appear in File Explorer, refer to The CD/DVD drive does not appear in A new LowerFilters value containing PxHelp20 is listed in the Registry Editor window. Sorry for the spelling mistakes, if any :). If it does not, test the CD/DVD hardware for failure.

Drive settings can be added or altered by accessing the BIOS settings during start-up. Select Computer in the main window. Windows checks for problems.