Home > Drive Not > My Dvd Rom Drive Not Working

My Dvd Rom Drive Not Working


Select Computer in the main window. Press Esc to return to the Main menu. Good discs to use are game or software discs that were purchased from a store. If you are using a notebook computer, skip to Clearing the upper and lower registry filters. navigate here

Highlight Main, then select System Summary and press Enter. Replace the cover and plug in the power, keyboard, mouse, and video cables. Do not waste your time and money trying any of the recommendations that will only waste many hours, only to discover the people recommending them do not understand the problem. Use the arrow keys to select Device Configuration, then press Enter. https://support.microsoft.com/en-us/kb/314060

Dvd Drive Not Working Windows 7

A copy of the registry has saved for back-up purposes to the Documents folder. If the CD-ROM does work from MS-DOS, this indicates that you have a corruption issue with Windows. Sign in 942 209 Don't like this video?

Did you try try the Scan for hardware changes, in Device Manager ? probably over £50. Uninstalling the driver and restarting the computer will reinstall the driver which will resolve most issues related to the device driver. Cd Drive Not Reading Disc Make sure the drive is recognized and correctly placed in the System Configuration Utility.

Hi Germ-x. Dvd Drive Not Working Windows 10 To reset the BIOS, use one of the following sets of steps, depending on the type of computer you are using: To reset the BIOS on a notebook computer, press F9 The drive name should be removed from the list (and the DVD/CD-ROM drives category will also be removed if there is only one drive).

Download it from here.

Reply to rahul132001 Gray Lee-GreenMay 14, 2014, 1:45 PM Luna_Solara said: I don't really understand much about computers, but my computer's (windows 7) disc drive won't read anything! Cd Rom Not Working Windows 10 There was a program which was downloaded at the same (which I opted not to download but it did anyway) and it started scanning for errors and cleaned the registry at about this yes if u can get the iso file of vista or any other windows os from download then burn it to disc or flash usb Reply to 1Box Ask Verify that the latest drivers are installed.

Dvd Drive Not Working Windows 10

Power on the computer and press F1 when prompted to enter the System Configuration Utility. http://support.hp.com/us-en/document/c03370738 Mechanical failure. Dvd Drive Not Working Windows 7 Trying a different drive may also be helpful. Cd Drive Not Working Windows 10 Verify that the latest version of the recording software is installed.

Click the Firmware link and look for any available CD/DVD firmware updates (for example: HLDS CH10L DVD-R/RW drive firmware update). http://amptools.net/drive-not/my-pc-dvd-drive-not-working.html Check the cable is correct for the drive:  ATA-66, ATA-100 or ATA-133 - 80 conductor, 40 pins or SATA connector Make sure the drive is connected to the correct cable connector. Just an update, the device is listed in the BIOS. Continue to check the drive name in Device Manager. Cd Drive Not Working Windows 8

Verifying the CD-ROM cables are correctly connected. When done, use the CD or DVD drive again to see if it can read discs. See the help section in the disc burning software that was used to burn the disc. http://amptools.net/drive-not/my-cd-r-drive-is-not-working.html Audio failure.

If it does not, test the CD/DVD hardware for failure. Cd Drive Not Showing How to test a computer CD-ROM or DVD drive for failures. Notes: Do not change Region codes unnecessarily.

HOWTO 29,191 views 2:11 How To Fix: CD-ROM Issues - Duration: 5:03.

For more information, refer to Performing an HP System Recovery (Windows 10) (in English) or to Performing an HP System Recovery (Windows 8) (in English). Verify if the drive is detected in BIOS (Figure 1, 2 & 3). Be careful not to dislodge other cables. Dvd Drive Not Detected Windows should ask for the drivers.

CD/DVD Drive won\'t recognize new discs, but plays old ones... Try booting a CD or bootable diskette Windows 2000, XP, Vista, 7, and later users If the above recommendations do not work, boot from the Windows disc to see if the Below are some instructions that will help you resolve the problem in some instances if the drive has not failed completely. weblink Go to step 7.

Double-click DVD/CD-ROM drives to expand the category. Loading... On the Diagnostics page that pops up, there are different sections for different issues. An alternate driver may be providing this functionality. (Code 32) Windows cannot load the device driver for this hardware.

Add to Want to watch this again later? Reports: · Posted 4 years ago Top garyallen349 Posts: 111 This post has been reported. Make sure you have selected this exact key name. Reply to Sailorondatea NicoleHillAuthorJun 26, 2015, 7:37 PM I had the same problem after upgrading to Windows 7, I purchased a Sony Imagination studio for my son and the DVD Rom

Good Luck Report SayianBlood- Jun 25, 2015 05:19AM Thank you. Today I got my IDE-SATA 2 USB2 adapter and connected it to my laptop. In the Search box, enter your product name/number (for example, Pavilion p6230f), then click Search. Figure : Find and fix problems in Control Panel Under Hardware and Sound, click Configure a device.

Windows should then detect the CD-ROM and reinstall it. I have also tried restoring the system to the factory defaults using the built in recovery partion but this fails part way through throwing up a message simply stating error.